TOP 10 - SPEAKER CABLES

• By increasing the separation of the conductors inside the cable, and therefore the amount of air between them, QED has created a low-loss Air Gap dielectric. This technology halves the dissipation and capacitance characteristics of the cable, and results in numerous audible improvements - particularly where timing and rhythmic accuracy are concerned. Despite this increased separation, though, XT40i retains the sort of cross-sectional area that makes it ideal for long cable runs.

• Forming the cable conductors into a tube-like shape around a hollow insulating rod in the centre of the cable equalises current densities, delivers very low inductance and presents a consistent, even load to an amplifier. The result is a cable that retains more of the finest musical details, that handles rhythms and tempos in the most natural and musically satisfying way, and that outperforms rival designs costing far more.

• Outside diameter: 6 x 14 mm

• Conductor area: 4 mm²
• Dielectric properties: Air Gap (εr = 2.4)
• Conductor chemistry: 99.999% oxygen-free copper
• Dielectric properties: Air Gap
• Loop resistance: 8.0 mΩ/m
• Parallel capacitance: 35 pF/m
• Dissipation factor @ 10kHz: 0.0295
• Self-inductance: 0.57 μH/m

Most cables feature PVC insulation, some have a basic fire rating such as CL3, etc. Unfortunately, most cables give off hazardous toxic smoke during a fire, posing a very serious health risk. LSZH cables are made from a special compound that performs as well as PVC insulation, but crucially gives off very little smoke and no halogen toxins in the event of a fire.

• Many leading architects and builders are now specifying LSZH spec cables as standard, along with commercial and marine.
• Only LSZH cables meet the legislated fire specifications for boat installations
• Conforms to the following specifications:
• IEC 61034-1:2005
• Measurement of smoke density of cables burning
• IEC 61034-2:2005
• under defined conditions.
• IEC 60332-1:2004
• Test for vertical flame propagation for a single insulated wire or cable.
• IEC 60754-2:1991
• (Amendment1, 1997) test on gas evolved during combustion of electric cables.

• By increasing the separation of the conductors inside the cable, and therefore the amount of air between them, QED has created a low-loss Air Gap dielectric. This technology halves the dissipation and capacitance characteristics of the cable, and results in numerous audible improvements - particularly where timing and rhythmic accuracy are concerned. Despite this increased separation, though, XT40i retains the sort of cross-sectional area that makes it ideal for long cable runs.

• Forming the cable conductors into a tube-like shape around a hollow insulating rod in the centre of the cable equalises current densities, delivers very low inductance and presents a consistent, even load to an amplifier. The result is a cable that retains more of the finest musical details, that handles rhythms and tempos in the most natural and musically satisfying way, and that outperforms rival designs costing far more.

• Outside diameter: 6 x 14 mm

• Conductor area: 4 mm²
• Dielectric properties: Air Gap (εr = 2.4)
• Conductor chemistry: 99.999% oxygen-free copper
• Dielectric properties: Air Gap
• Loop resistance: 8.0 mΩ/m
• Parallel capacitance: 35 pF/m
• Dissipation factor @ 10kHz: 0.0295
• Self-inductance: 0.57 μH/m

• The premium speaker cable, DALI CONNECT SC F222C, withholds carefully selected conductors and dielectric materials. All components are optimized for the free flow of sound.

• AWG: 14

• Number of strands: 2x57
• Layers: 3
• Strand (Ø): 0,22
• Strand (mm2): 0,038
• Total mm2: 2,168
• Conductor: OFC
• Insulation: PE
• Cable (Ø)(mm): 3.5+3.5
• Cable shape: SQR + SQR
• Nylon mesh: NO
• Lenght/spool [M]: 200

• Screwloc 4mm plugs and Spade terminations provide secure cableconnection
• They are 24c gold plated for optimum signal transfer
• They have colour coded ABS barrels to ensure correct phasing and prevent amplifier damage

Special flame-retardant speaker cable of class Eca. Thanks to stranded conductors, the cable is highly flexible and easy to lay. The sheath can be easily removed due to the talcum, and the conductors are clearly marked in red and blue, simplifying installation. The construction with sturdy 0.25 mm thick copper wires also facilitates insulation removal and connection.

• Application: High-quality speaker cable for building installation
• Flame-retardant: yes, according to EN 50575 Class Eca
• Construction: Conductors stranded with sheath, talcum-coated for easy stripping
• Conductor material: High-purity copper
• Conductor construction: Strand 50x 0.25 mm
• Conductor cross-section: 2x 2.5 mm² (2x 14 AWG)
• Dielectric: PVC
• PVC Cable diameter: 8.4 mm
• Coding: Red / Black
• Meter marking: yes, continuous
• Packaging: Disposable spool
• Compliance: CE | RoHS | REACH
• Made in Europe: yes

• The Premium speaker cable Silver has a silver-plated conductor for optimised high frequency reproduction.
• High frequency range optimised,
• silver-plated concentric copper
• Opposing S/Z stranding (easy to install)
• Resistant insulation
• Plus/minus recognition
• Price per meter

Wilson speaker cables are dedcated both to stereo systems as well as Home Cinema Wilson speaker cables delivers finesse and subtlety just as well as dynamic heft and punch

• conductors made of high purity OFC cooper
• cross sectional area: 4,0 mm²
• transparent jacket
• cable is meter marked so you will always know how many meters left on spool
• +/- recognition
• banana plugs